Sizing · 6 min read

RV and boat clearance

Measure the right points so an RV or boat actually fits under the roof.

Measure the highest point

Measure from the ground to the top of the highest fixture: AC unit, antenna, solar panel or boat tower. That number, plus a margin, drives leg height.

A worked example

Suppose a travel trailer measures 11 ft 2 in to the top of the rooftop AC unit. Rounding up and adding a margin for a slight driveway slope suggests looking at configurations with at least 12 ft of usable clearance at the entry, and confirming that clearance with the quote rather than relying on leg height alone.

For an enclosed RV garage, the door opening is the limiting dimension, so the wall height must be chosen around a door that clears the same measurement. These numbers are an illustration, not a recommendation for your RV.

Measurement checklist

  • Ground to highest rooftop fixture, on level ground
  • Overall length including hitch, tongue, ladder and bike rack
  • Width with mirrors, awnings and slide-outs extended
  • Tow vehicle length if it will park under the same roof
  • Turning path from the road or driveway to the bay
  • Boats: trailer height plus tower, windshield or outboard tilt

Doors reduce clearance

If the building is enclosed, the door opening is lower than the leg height. Plan the door size first, then the wall height around it.

Length and width

Include the hitch or tongue, and room for slide-outs and walking access on both sides.

Requirements vary by county and city. Confirm with your local building department before you finalize a design.

General guidance only. Final specifications, engineering and permit requirements are confirmed for each project.

Related questions

Quick answers

View all questions
How tall should a metal RV carport be?

Measure the RV’s maximum height including rooftop air conditioners, antennas and other accessories, then add clearance for safe entry and exit. A building’s listed leg height may differ from the usable opening clearance, so check both before ordering.

Learn about RV clearance
What is the difference between leg height and garage door clearance?

Leg height describes the side-wall height of the building. Usable door clearance depends on the actual opening, frame, header and door configuration. A building with a given leg height does not automatically provide a door opening of that same height. Confirm the planned opening dimensions for your vehicle.

Read the garage door clearance guide
What is the easiest way to get a custom RV shelter or garage quote?

Measure the RV’s overall length, maximum height including rooftop accessories, and width with mirrors or slide-outs. Note the maneuvering space you want, installation ZIP code, ground surface and whether you prefer an open shelter or enclosed garage. Submit those details through the 3D designer or quote form for review.

Explore RV and boat covers
Ready to plan?

Try dimensions in the 3D designer or send us your project details.