Planning · 8 min read

Choosing a metal building size

Work out width, length and height from what goes inside, not from a number you heard somewhere.

Start with the contents

List every vehicle, machine and storage item. Measure each one, including mirrors, open doors and trailer tongues.

Add the space you need to walk around them and open doors. Most people underestimate this by several feet.

A measuring worksheet

Fill this in for each item before you open the designer. The totals give you a minimum footprint, not a final size.

  1. Width with mirrors folded out, plus about 3 ft per side to open doors and walk past.
  2. Length bumper to bumper (or hitch to tail for trailers), plus room for a bench or walkway at the back.
  3. Height to the highest point: racks, ladders, antennas, raised cab, loader bucket.
  4. Add any workbench depth, shelving depth and lift footprint along the walls.
  5. Note which wall each door faces and how vehicles approach from the driveway.

Width, length, then height

Width usually sets the number of vehicle bays. Length decides whether you can park nose-to-tail or add a workbench at the back.

Leg height (the side wall height) controls door size and overhead clearance. Peak height is taller, but you cannot count on it for clearance along the walls.

Common starting points (verify against your own measurements)
UseFootprints often consideredWhat usually decides it
One vehicle, enclosed12×20 to 18×25Door width and walking room
Two vehicles20×20 to 24×30Vehicle length and storage along walls
Personal workshop24×30 to 30×40Bench, tool and lift layout
RV or boat12 to 18 wide, length of rig plus marginHeight to rooftop fixtures

Nominal vs. usable size

Listed dimensions are nominal outside measurements. Roof overhangs, framing and trim reduce usable interior space.

If a measurement is tight, ask for the actual interior clearance before you commit.

Plan for later

A few extra feet now is usually cheaper than a second building later. Think about what you might store in five years.

Requirements vary by county and city. Confirm with your local building department before you finalize a design.

Related examples

Catalog examples show listed dimensions. Pricing, availability and suitability for your site are confirmed by quote.

General guidance only. Final specifications, engineering and permit requirements are confirmed for each project.

Related questions

Quick answers

View all questions
What size metal garage do I need for two cars?

A 20×20 metal garage is a common starting point for two-car storage, but vehicle dimensions, door placement and clearance matter. Larger vehicles, workbenches or extra equipment may call for 20×25, 24×30 or another size. Measure your vehicles, including mirrors and open doors, before choosing dimensions.

Learn how to size a building
Is a 30×40 metal building large enough for a workshop?

A 30×40 building provides a 1,200-square-foot footprint and fits many personal workshop layouts. The right size depends on your tools, machinery, vehicle storage, bench space and circulation. A taller configuration may help with certain equipment, subject to design and engineering requirements. The catalog includes a 30×40×14 workshop example.

View the 30×40 workshop example
What size metal building do I need to store a tractor?

Measure the tractor’s overall width, height and length, including attachments or implements. Then add room for turning, access, maintenance and future equipment. Open-sided shelters, carports and enclosed agricultural buildings can all work depending on how much protection you need.

Browse agricultural buildings
What is the most cost-effective metal building layout for two vehicles?

Start with actual vehicle measurements and leave space to open doors, walk around and store essentials. A simple rectangular footprint with an appropriate roof and only the doors you need is a useful baseline. Compare an open carport with an enclosed garage, including site preparation and permit costs, to find the best overall value.

View the 18×25 garage example
Ready to plan?

Try dimensions in the 3D designer or send us your project details.